Position:Home > PRODUCT > Automobile Testing Equipment > exhaust gas analyzer

SV-5QC French Core Exhaust Gas Analyser (New Model)

SV-5QC automotive exhaust analyzer (new model) imports advanced technology from abroad. It is assembled from a complete set of imported French Capelec machine cores. It has the advantages of accurate measurement, simple operation, high durability and fast

SV-5QC French Core Exhaust Gas Analyser (New Model)

 


[Product Introduction]
SV-5QC automobile exhaust analyzer French Capelec original imported engine core adopts the principle of non-spectral infrared absorption method, through the analysis of micro-computer, the concentration of HC, CO and CO2 in motor vehicle exhaust gas can be measured directly; the concentration of NO and O2 in exhaust gas can be measured by electrochemical principle, and the concentration of CO, CO2, HC and O2 can be measured according to the measured concentration. Calculate the excess air coefficient lambda

[Technical parameters]
Use of environmental conditions:
Temperature: 0-40 C
Humidity: not more than 95%
Atmospheric pressure: 70.0-106 kPa
Power supply: AC220V + 10%; 50Hz + 1Hz
Scope of measurement:
HC: 0-20000 (ppm) Vol
CO: 0-15.0 (%) Vol
CO2: 0-20.0 (%) Vol
O 2:0-25.0 (%) Vol
NO: 0-5000 (ppm) Vol
Lambda: 0-9.9999
Engine speed (rpm): 300-9999 rpm (optional)
Oil Temperature: 0-120 C (Optional)

Measurement accuracy:
HC: 1ppm
CO: 0.001%
CO2: 0.01%
O 2: 0.1%
NO: 1ppm

Measurement error:

气体

测量范围

绝对误差

相对误差

HC

0-20000ppm

±5%

10ppm

CO

0-15%

±5%

0.03%

CO2

0-20%

±5%

0.40%

O2

0-25%

±3%

0.10%

NO

0-5000ppm

8%

25ppm

■Response time: no more than 10s, O 2; NO no less than 15s
■Preheating time: 10 minutes (can be preheated for 3 minutes emergency detection)
■Size: 339*260*158mm (length*width*height)

[Functional characteristics]
It meets the national GB/T 18285-2005 standard.
■Using the imported core of Capelec, France, the HC, CO and CO2 in automobile exhaust gas were measured by using the principle of non-spectrophotometric infrared absorption, and the concentration of O2 and NO was measured by electrochemical principle.
It has idle speed and double idle speed test function, and can select oil temperature and speed measurement function.
■Configuration of 7 inch high brightness LCD display, support multi-language operation menu.
■Automatically calculates and displays the value of excess air coefficient.
■Equipped with RS-232C digital serial communication interface to facilitate networking.
■Have more than 500 groups of data storage and access functions.
■The printer can be configured, and the license plate number can be input and output when printing.
■The exhaust gas can be detected for vehicles fueled by natural gas, liquefied gas and gasoline.
■The automobile power supply inverter can be configured to facilitate exhaust gas inspection on board.